tlfong013983Sep 8, 12:44You said the following: “However the servo is still not responding, so I am wondering the following issues: The servo has burn, due to any mistake during the test.(1) Servo […]

tlfong013983Sep 8, 12:44You said the following: “However the servo is still not responding, so I am wondering the following issues: The servo has burn, due to any mistake during the test.(1) Servo […]

tlfong013983Sep 7, 23:14(1) Short 5V0 TxD to RxD(2) Connect shorted TxD/RxD to signal terminal of LX-824HV(3) Send command request for temperature(4) If all goes well, LX-824HC should return temperature.Bed time, call it […]

How to start a Rpi Robotics Project Using Cheap Motors? [closed] Ask QuestionAsked yesterdayActive todayViewed 36 times0Closed. This question is off-topic. It is not currently accepting answers. Shopping requests are explicitly off-topic. Closed 4 hours ago by Milliways, Steve Robillard, joan, Ingo, Darth Vader♦. (Viewable […]

5V Relay module working but LED not turning on – How to wire? Ask QuestionAsked yesterdayActive todayViewed 35 times0 I’m trying to control a relay from Raspberry Pi that will switch an LED on/off. The […]

pySerial Short introductionhttps://pyserial.readthedocs.io/en/latest/shortintro.html pySerial API Classeshttps://pyserial.readthedocs.io/en/latest/pyserial_api.html

Question How come my relays C and D do not turn on? Answer Introduction I read your design and found everything looking good. I will later look at the datasheets you referred […]

5V Relay module working but LED not turning on – How to wire? Ask QuestionAsked todayActive todayViewed 9 times0 I’m trying to control a relay from Raspberry Pi that will switch an LED on/off. The […]

5V Relay module working but LED not turning on – How to wire? Ask QuestionAsked todayActive todayViewed 3 times1 I’m trying to control a relay from Raspberry Pi that will switch an LED on/off. The […]