Month: April 2021

A4899

Fake microstepping in A4899 and LV8729 stepper-drivers? Ask QuestionAsked 2 days agoActive 2 days agoViewed 32 times1 I built a test jig to experiment with a friend’s 16-pin A4988 stepper driver, and even added bi-directional […]

bts7960 notes

Is it necessary to use a pull down resistor with this BTS7960? Ask QuestionAsked 3 days agoActive todayViewed 126 times1 I have an Arduino Nano controlling a BTS7960 that is 10 meters away. I have […]

BTS7960 notes

Is it necessarly to use pull down resistor with BTS7960 Ask QuestionAsked yesterdayActive todayViewed 83 times0 I have Arduino nano controlling a BTS7960 that is 10 meters away, and i have one 24V power supply. Both Arduino and BTS7960 get 5V through a LM2596 step down converter. […]

BTS7960

Is it necessarly to use pull down resistor with BTS7960 Ask QuestionAsked yesterdayActive todayViewed 82 times0 I have Arduino nano controlling a BTS7960 that is 10 meters away, and i have one 24V power supply. Both Arduino and BTS7960 get 5V through a LM2596 step down converter. […]

BTS7960

Is it necessarly to use pull down resistor with BTS7960 Ask QuestionAsked yesterdayActive todayViewed 78 times0 I have Arduino nano controlling a BTS7960 that is 10 meters away, and i have one 24V power supply. Both Arduino and BTS7960 get 5V through a LM2596 step down converter. […]

BTS7960 notes

Is it necessarly to use pull down resistor with BTS7960 Ask QuestionAsked todayActive todayViewed 62 times0 I have Arduino nano controlling a BTS7960 that is 10 meters away, and i have one 24V power supply. Both Arduino and BTS7960 get 5V through a LM2596 step down converter. […]

70W COB LED lamps

Is this power supply suitable for powering these chip on board (COB) LEDs? Ask QuestionAsked yesterdayActive todayViewed 329 times1 I have an LED project using 100 Citizen CLU048-1212C4 LEDs. I need to run each LED at […]

BTS7960 notes

Is it necessarly to use pull down resistor with BTS7960 Ask QuestionAsked todayActive todayViewed 46 times0 I have Arduino nano controlling a BTS7960 that is 10 meters away, and i have one 24V power supply. Both Arduino and BTS7960 get 5V through a LM2596 step down converter. […]