Uncategorized

Rpi 4G

Asked 
Viewed 6 times
0

I have a robot(use raspberry pi 3) outside my home(no internet connection there) and I ‘m with my laptop at home and I want to see the graphical environment like this of raspberry pi. How can I do this? I ‘m thinking to get this module with a SIM card and put it to raspberry pi to have 3G or 4G connection. Can you tell me more about this (if I can do it with this module) ? I have to give some commands to the terminal of raspberry pi to have 4G ? After these commands ,can I do raspberry pi to connect to 4G automatically ,when I give current to it? After connecting to 4G ,can I have access to raspberry from laptop via vnc? I have these questions and I want your help about this project!!! Thanks a lot!

 New contributor
  • Unfortunately, questions about home networking and consumer-grade devices are explicitly off-topic here. You could try to ask this question on Super User. – Ron Maupin yesterday

Asked 
Viewed 41 times
2

I have a robot (using the Raspberry Pi 3) outside my home with no internet connection, and I want to remotely access like this my Raspberry Pi’s desktop. How can I do this?

Perhaps if I get this module with a SIM card and connect it to Raspberry Pi it’ll have a 3G or 4G connection. Can do it with this module?

How would I configure this module, what would I have to do to make the Raspberry Pi connect automatically when I turn it on? After connecting to 4G, can I access the Raspberry Pi via VNC?

  • Ah, let me see. Your project sounds interesting. Let me summarize your situation and goal: (1) You have a laptop at home. Can I assume you have a WiFi network at home and the laptop is connected to the WiFi network? If your home has no WiFi network, then skip (2) and jump to (3). (2) You have a Rpi3 based robot outside and you want to control your robot using your laptop. I think you can connect your Rpi3 to the same WiFi network. Then you can use your laptop to VNC control your Rpi3 Robot. / 同continue, … – tlfong01 yesterday
  • Now if you have no Wifi network at home to connect to laptop, then (3) as you suggest, you need a SIM8/9/76xx 4G module with a SIM card. You can use the 4G module to connect Rpi to 4G mobile network. Now you can use a mobile phone to say, send SMS, to control the Rpi3 Robot. In other words, you don’t need the laptop any more, your smart phone can SMS control the robot. Of course there are many more other ways to have 4G fun with your robot. Comments and counter suggestions welcome. Ah, bed time now. See you tomorrow. Cheers. – tlfong01 yesterday
  • 1
    In my home I have internet connection (the laptop is connected to the wifi),but I need a SIM808 module to connect it to raspberry pi to have 4G connection from everywhere(because the robot will be far away from home). So, my problem is : What AT commands(for python) should I use to enable 4G for raspberry pi??? After,I can use my laptop to VNC control the Robot. Can anyone know any link about “enable 4G in raspberry pi”??? I searched ,but I didn’t find anything. Thanks!!! – Nick_Gkoutzas yesterday
  • 1
    What is the max. distance between laptop and RasPi? Please address me with @Ingo otherwise I won’t see your reply. – Ingo yesterday
  • 1
    max distance = 50-150 meters – Nick_Gkoutzas yesterday
  • 1
    @Nick_Gkoutzas, I reccomend you just connect to wifi. – user96931 yesterday
  • Hi, @Nick_Gkoutzas, I agree with you that 4/5G robot is the way to go. I remember that more than 10 years ago, when I started learning Arduino with Decimilla, I already read about laptop WiFi controlled robot car project. Now fast forward 10+ years, if you are still talking about laptop WiFi control robot car, your bad Arduino friends will for sure LOL at you. Now some random brainstorming comments: (a) SIM800, GSM, 2G, 3G, stuff are face losing out of date. You should instead say SIM 900/7600, 4G LTE, etc. / to continue, … – tlfong01 21 hours ago
  • To update/upgrade yourself, I would recommend to start from here: (4) “Rpi Sim7600 4G HAT – WaveShare”: waveshare.com/wiki/SIM7600E-H_4G_HAT. Cheers. – tlfong01 21 hours ago
  • More ref: (5) WaveShare Rpi4B SIM7600G-H 4G HAT – ¥378 trade.taobao.com/trade/detail/… (6) SixFab Rpi 4G LTE HAT – $39 sixfab.com/product/… (7) SMS Gateway with 4G MiFi modem ZTE MF920V raspberrypi.stackexchange.com/questions/107923/… / to continue, … – tlfong01 20 hours ago
  • (8) Python AT commands to SMS 4G MiFi modem raspberrypi.stackexchange.com/questions/108733/…. Cheers. – tlfong01 20 hours ago
  • You asked the following: (9) “have to give some commands to terminal of Rpi to do 4G ?, (10) “Can Rp connect to 4G automatically? “. My answer: Yes, you can use terminal emulator such as puTTY, miniCom, cutCom, RealTerm etc to use “AT” commands to talk to the 4G HAT. If later you have learned the basic AT commands such as (a) texting SMS, (b) getting GPS info, (c) setting up 4G mode during Rpi boot, etc you can use Rpi Thonny python program to talk AT with the 4G guy. Here is an example: imgur.com/KYW5mcQ. Cheers. – tlfong01 20 hours ago
.END

Categories: Uncategorized

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: